DRIVEWAYS * WALKWAyS * POOL DECKS * GARAGE FLOORS * PATIOS
Congratulations! You can look forward to years of beauty and convenience with your new concrete surface.
DO NOT USE ANY SOLVENTS OR PINE-SOL!
Regular oil and grease should not harm the surface and can be cleaned off with detergent and paper towels.
Tar can be easily removed with Kerosene only.
Battery acid should be kept off the coating. It will damage the coating and your concrete!
Gasoline can discolor the surface. Avoid over filling tanks. If a spill does occur, rinse immediately with water and dab (Do not rub) with paper towels.
Transmission Fluid should not be left on the surface for more than a few hours. Wipe up with paper towels.Rust can be removed using Muriatic Acid. If you do not feel that you can do this, call our office and we will come out and clean it for you, for a nominal charge.
Tire skid marks may require professional touch up. This can be done for a nominal charge.Fertilizers and insecticides: Some products can damage the coating. It is best to rinse any of those products off of the surface as soon as possible. If rust or discoloration develops, call Pro-Crete for professional removal or touch up.
|Copyright & copy; Pro-Crete|